PLUMBING PREVENTATIVE MAINTENANCE

What is Preventative Maintenance?

Preventative maintenance ensures all our customers assets are serviced and tested in accordance with legal requirement and manufacturer’s warranty conditions. This safeguards high demand plumbing assets, that service multiple residences, to guarantee compliance with manufacturer’s warranty conditions, increase longevity and reduce running cost.

Service agreements are tailored to include only what is on site. The assets mentioned below are by way of example and may not be on every site.

Preventative maintenance asset/plant package may include:

  • Backflow prevention test and certification (legal requirement)
  • Thermostatic mixing valve (TMV) testing (legal requirement)
  • Eye wash bay/shower (legal requirement)
  • Hot water/solar hot water unit service 
  • Pump maintenance and replacements (including but not limited to sewer, stormwater, rainwater and hot water circulation pumps)
  • Jet cleaning of stormwater and sewer drains
  • Fixture/asset quarterly health checks
  • Asset life cycle reports

Compliance Servicing

Preventative Maintenance Compliance Frequency Maintenance Required
Backflow prevention test and certification 12 Monthly
  • Test as per Australian standards
  • Submitted reports to government authorities
Thermostatic mixing valve (TMV) test, certification 12 Monthly
  • Test as per Australian standards
Eye wash bay/shower test and certification 6 Monthly
  • Test as per Australian standards
All pump maintenance and report

  • Rainwater pumps (+ UV if fitted)
  • Cold water booster pump
  • Pool pump
  • Stormwater/grey water pump
  • Sewer/black water pump
  • Under bench sewer pump
  • Hot water circulation pump
6 Monthly
  • As recommended by manufacturer
  • Inspect for correct operation
  • Inspect for leaks
  • Check inlet and outlet pressure gauges
  • Check oil levels (if required)
  • Ohms test and document
  • Check control panel operations (if connected)
  • Check warning lights and alarms (if connected)
All hot water unit maintenance and report

  • Instantaneous systems
  • Storage systems (electric and gas)
  • Holding/buffer tanks
  • Solar systems
12 Monthly
  • Check pressure relief valve for operation
  • Check for leaks
  • Activate relief valve (replace if defective)
  • Ensure that the pressure setting is compatible
Jet cleaning of stormwater/sewerage branch 12 Monthly
  • Jet clean branch drain
  • Remove and report all debris
  • Camera line if blockage detected

Protection (Includes Compliance)

Plumbing protection provides assurance that all plumbing related assets are covered for operational, running and property insurance requirements.

This ensures that all common area assets are inspected every 12 weeks. At the time of inspection customers will receive a comprehensive condition report on all common hydraulics.

The difference from the compliance package is that, following inspections, we will provide customers with a report identifying problems. We anticipate that these defect reports will reduce future asset breakdowns and increase life expectancy.

Plumbing Protection Service

Preventative Maintenance Protection
(Includes compliance)
Frequency Maintenance Required
Health Check

Common area assets;

Taps, hose cocks, sinks, basins, vanity’s, tubs, baths, showers, cisterns, toilets and urinals, tempering valves

Water meters, gas meters, eye wash bay/showers, storm water spells, storm water pits, sewer manholes, hot water units, pumps, TMV’s, balancing valve, pressure reducing valve.

3 Monthly
  • Inspect for leaks, damage and maintenance signs
  • Inspect all assets for obvious faults
  • Ensure correct operations of all assets
  • Inspect bracketing and supports to ensure firm fixing
  • Condition reports for all health check assets provided with quotations’ for identified defective and/or faulty fixtures/assets

O'NEILL & BROWN PLUMBING SERVICE GUARANTEE

You will receive quality workmanship and 5 star customer service

CALL US (07) 3188 3222